Edwards iXM Series User Manual

12. Service
WARNING:
Risk of injury
. When returning the system to our Service Centre or company, the
requirements of the Return of Equipment Procedure must be complied with. Read
form HS1 and ll out form HS2, which can be downloaded from
edwardsvacuum.com/HSForms/.
Note:
Do not drain the oil from the sys
tem. Clearly state the pump is full of oil when compleng
form HS2.
Our products, spares and accessories are available from our companies in Belgium,
Brazil, China, France, Germany, Israel, Italy, Japan, Korea, Singapore, United Kingdom,
U.S.A and a world-wide network of distributors. The majority of these centres employ
Service Engineers who have undergone our comprehensive training courses.
Order spare parts and accessories from our nearest company or distributor. When
ordering, state for each part required:
▪ Model and Item Number of the equipment
▪ Serial number
▪ Item Number and descripon of part.
Our products are supported by a world-wide network of our Service Centres. Each
Service Centre oers a wide range of opons including: equipment decontaminaon,
service exchange, repair, rebuild and tesng to factory specicaons. Equipment which
has been serviced, repaired or rebuilt is returned with a full warranty.
The local Service Centres can also give our engineers to support on-site maintenance,
service or repair of equipment. For more informaon about service opons, contact our
nearest Service Centre or the company.
12.1 Return the equipment or components for service
Before you send your equipment to us for service or for any other reason, you must send
us a completed Declaraon of Contaminaon of Vacuum Equipment and Components –
Form HS2. The HS2 form tells us if any substances found in the equipment are
hazardous, which is important for the safety of our employees and all other people
involved in the service of your equipment. The hazard informaon also lets us select the
correct procedures to service your equipment.
We provide instrucons for compleng the form in the Declaraon of Contaminaon of
Vacuum equipment and Components – Procedure HS1.
If you are returning a vacuum pump, note the following:
▪ If a pump is con
gured to suit the applicaon, make a record of the conguraon
before returning the pump. All replacement pumps will be supplied with default
factory sengs.
10/2020 - ©Edwards Limited
Page 91M56635880_D
M56635880_D - Service

Edwards iXM Series Specifications

General

Brand	Edwards
Model	iXM Series
Category	Water Pump
Language	English