USING THE E-43A 29
PrintMe tab
The PrintMe tab allows you to submit print jobs using Document IDs if you have a PrintMe
subscription. For more information, see Printing Guide.
NOTE: PrintMe cloud printing must be enabled in Configure for the PrintMe tab to display in
the menu.
Job List tab
The Job List tab on the copier/printer touch panel provides access to jobs according to the
status of the job, similar to the Active and Printed Jobs windows in Command WorkStation.
The lists are as follows:
To change from one list to another, press the desired tab at the bottom of the copier/printer
touch panel.
On each of these lists, you can scroll up and down one line at a time, or advance to the top or
bottom of the job list. Select a job, and choose the appropriate button to Print, Print and
Hold, Delete, or display the Properties of the job. On the Properties tab, you can change the
number of copies, but not any other job properties.
Tools tab
The Tools tab allows you to perform tray alignment and calibration.
Scan tab
The Scan tab allows you to scan documents. For more information, see Utilities.
Active
Jobs currently waiting to print.
Held
Held jobs.
Printed
Printed jobs.
Secure
Allows you to log on to display secure print jobs.
Tray Alignment
Adjust the placement of text and images on a page so that they are correctly aligned on the
sheet of paper and both sides of a duplex sheet have the exact same alignment. For more
information about this function, see Utilities.
Calibration
Calibrate the E-43A using ColorCal. For more information, see Color Printing.
To Next Page
Loading...
Need help?
General
