DVC6000f Series
March 2006
1-4
Using This Manual
Procedures that require the use of the Model 375 Field
Communicator have the Field Communicator symbol
in the heading.
Also included is the path required to accomplish
various tasks; the sequence of steps through the Field
Communicator menus. For example, the path to
Resource Block Mode is RB > Setup > Res Block
Mode.
An overview of the Model 375 Field Communicator
resource block and transducer block menu structures
are shown at the beginning of this manual. Menu
structures for the function blocks are included with
each function block section in Detailed Setup / Blocks.
Throughout this document, parameters are typically
referred to by their common name or label, followed by
the parameter name and index number; for example,
Write Priority (WRITE_PRI [39]). However, not all
interface systems support the use of the parameter
label and instead use only the Parameter Name,
followed by the index number, when referring to the
block parameters.
Specifications
Specifications for the DVC6000f Series digital valve
controllers are shown in table 1-1.
Related Information
Fieldbus Installation and Wiring
Guidelines
This manual describes how to connect the fieldbus to
the digital valve controller. For a technical description,
planning, and installation information for a
FOUNDATION fieldbus, refer to the FOUNDATION
Fieldbus Technical Overview available from the
Fieldbus
FOUNDATION and Fieldbus Installations in a
DeltaV System available from your Emerson Process
Management sales office.
Related Documents
Other documents containing information related to the
DVC6000f Series digital valve controllers include:
FIELDVUE
DVC6000f Series Digital Valve
Controller (Bulletin 62.1:DVC6000f)
FIELDVUE
DVC6000f Series Digital Valve
Controllers Quick Start Guide - Form 5778
AMS ValveLink Help or Documentation
DeltaV Online Help or documentation
www.fieldvue.com
Educational Services
For information on available courses for DVC6000f
Series digital valve controllers, as well as a variety of
other products, contact:
Emerson Process Management
Educational Services, Registration
P.O. Box 190; 301 S. 1st Ave.
Marshalltown, IA 50158−2823
Phone: 800−338−8158 or
Phone: 641−754−3771
FAX: 641−754−3431
e-mail: education@emersonprocess.com
1
To Next Page
Loading...
Need help?
General
