Emerson Fisher Fieldvue DVC6020f User Manual

DVC6000f Series
March 2006
C-6
Figure C-2. Accessing Transducer Block Methods
DIGITAL VALVE
CONTROLLER
ICON AND NAME
TRANSDUCER
BLOCK ICON
AND NAME
METHODS
Starting Methods
Transducer Block
The following methods are accessed via the
transducer block: Setup Wizard, Auto Travel
Calibration, Manual Travel Calibration, Supply Sensor
Travel Calibration, Output A Sensor Calibration,
Output B Sensor Calibration, Travel Sensor Adjust,
Stroke Valve, Stabilize/Optimize and Relay Adjust.
Refer to figure C-2 and the following steps to access
these methods.
1. Start DeltaV Explorer by selecting DeltaV >
Engineering > DeltaV Explorer from the Start menu.
2. Locate the digital valve controller icon in the All
Containers pane (the left panel) and left-click once on
the digital valve controller icon or name.
3. Locate the transducer block icon in the Contents
of... pane and right click once on the block icon or
name to bring up the context menu.
4. Select the desired method from the the context
menu and left-click to start the method.
Resource Block
The Master Reset method and the Display DD Version
method are available via the resource block. Refer to
figure C-3 and the following steps to access these
methods.
Figure C-3. Accessing Resource Block Methods
RESOURCE BLOCK
ICON AND NAME
MASTER RESET
METHOD
DISPLAY DD
VERSION METHOD
DIGITAL VALVE
CONTROLLER
ICON AND NAME
1. Start DeltaV Explorer by selecting DeltaV >
Engineering > DeltaV Explorer from the Start menu.
2. Locate the digital valve controller icon in the All
Containers pane and left-click once on the digital valve
controller icon or name.
C

Emerson Fisher Fieldvue DVC6020f Specifications

General

Brand	Emerson
Model	Fisher Fieldvue DVC6020f
Category	Controller
Language	English