Safety and operating instructions
10 © Anbaufräsen PC GmbH | 3390 5221 01 | 2020-09-07
Original Instructions
2.2 Qualification
Transporting the hydraulic attachment is only permitted
if carried out by people who:
• are authorised to operate a crane or a forklift truck
according to the applicable national provisions,
• know all the relevant national/regional safety provi-
sions and accident prevention rules,
• have read and understood the safety and transport
chapter of these Safety and operating instructions.
First installation and commissioning of the hydraulic
attachment is only permitted if carried out by people
who:
• are authorised by AnbaufräsenPCGmbH,
• know all the relevant national/regional safety provi-
sions and accident prevention rules,
• have read and understood these Safety and operat-
ing instructions.
Installing, maintaining, storing and disposing of the
hydraulic attachment are only permitted if carried out by
people who:
• know all the relevant national/regional safety provi-
sions and accident prevention rules,
• have read and understood these Safety and operat-
ing instructions.
Operating the hydraulic attachment is only permitted if
carried out by qualified carrier drivers. Carrier drivers are
qualified if they:
• have been trained to operate a carrier according to
the national regulations,
• know all the relevant national/regional safety provi-
sions and accident prevention rules,
• have read and understood these Safety and operat-
ing instructions.
Testing the hydraulic installation is only permitted if
carried out by professionals. Professionals are people
who are authorised to approve a hydraulic installation for
operation according to the national regulations.
Repairing the hydraulic attachment is only permitted if
carried out by professionals trained by An-
baufräsenPCGmbH. These professionals must have
read and understood these Safety and operating instruc-
tions. They must follow all safety instructions and guide-
lines for repair. Otherwise the operational safety of the
hydraulic attachment is not guaranteed.
Personnel (carrier operator, maintenance personnel)
must receive instructions from the operator regularly. For
the purpose of improved traceability, the provision of in-
structions must be recorded.
2.3 Intended use
Only attach the drum cutter to a hydraulic carrier of a
suitable load-bearing capacity. Read the carrier manu-
facturer's Safety and operating instructions before at-
taching the drum cutter to the carrier and operating it.
Observe all instructions.
The drum cutter is intended exclusively for mounting on
a hydraulic excavator or, following agreement with the
authorized Customer Center / dealer in your area, with
another carrier.
The drum cutter serves exclusively to cut:
• Rock
• Concrete (reinforced and non-reinforced)
Prior to carrying out cutting work on reinforced concrete,
discuss this with the manufacturer (An-
baufräsenPCGmbH).
• Asphalt
• Frozen soil
• Ice
Furthermore, the drum cutter is suitable for cutting
ditches and tunnels and for mixing soil structures. The
drum cutter can be used to a depth of 30m (99ft) under
water. Contact the authorized Customer Center / dealer
in your area if bigger water depth is required.
When cutting with the drum cutter, check the compres-
sive strengths of the rock to be cut (see chapter Techni-
cal specifications).
Intended use also includes adhering to all specifications
contained in this manual.
Any further use which exceeds or is contrary to the in-
tended use is considered inappropriate use.
2.3.1 Intended use of the longitudinal drum
cutters with a drilling auger
The longitudinal drum cutter with drilling auger is in-
tended exclusively for mounting on a hydraulic excavator
or, following agreement with the authorized Customer
Center / Dealer in your area, with another carrier.
The longitudinal drum cutter with drilling auger serves
exclusively for creating vertical holes in:
• Ground classes 1 to 7 per DIN18300
• Stratified, fragmented and brittle rock of medium
hardness
• Frozen soil
• Ice
Typical applications are overhead line construction,
beam-type retaining construction, earth anchors, strain-
relieving boring, fencing and planting.
To Next Page
Loading...
General