Safety and operating instructions
© Anbaufräsen PC GmbH | 3390 5221 01 | 2020-09-07
Original Instructions
15
2.15 Repair, precautions
Maintenance work must be conducted exclusively by au-
thorised and trained maintenance personnel.
2.15.1 Maintenance works not allowed by
the manufacturer
Some maintenance activities must be carried out exclu-
sively by the manufacturer. If such maintenance activi-
ties are required, consult the authorized Customer cen-
ter / Dealer in your area in order to ensure that they pro-
ceed safely.
The following maintenance activities are not allowed by
the manufacturer:
• Repairs to the gear and hydraulic motor
• Replacing wear sleeves and pick boxes
• Welding work on the cutter drums
• Welding work on the gear housing
2.16 Changes to the hydraulic
attachment, precautions
WARNING Changes to the hydraulic attachment
Changes to the hydraulic attachment or the adapter
plate may lead to serious injury.
u Never carry out any changes to the hydraulic attach-
ment or the adapter plate.
u Only use original parts or accessories approved by
the manufacturer.
u Modifications that entail new hazards may require a
new procedure for assessing conformity.
WARNING Injuries due to the use of incorrect
spare parts
The use of incorrect or defective spare parts can result
in risks to personnel as well as damage, malfunctioning
or a total failure of the drum cutter.
u Only use original parts or accessories approved by
the manufacturer.
u If there are any questions, consult the authorized
Customer Center / Dealer in your area.
2.17 Environmental pollution,
precautions
NOTICE Environmental pollution due to hydraulic oil
Hydraulic oil is permanently environmentally harmful. Es-
caped hydraulic oil will lead to groundwater and soil con-
tamination. Organisms may die.
u Collect any hydraulic oil which escapes to avoid envi-
ronmental pollution. For minor volumes use an ab-
sorbing medium (in case of an emergency use soil).
In case of major leakages contain the hydraulic oil. It
must not drain off and penetrate the ground or enter
the water table or water supplies.
u Collect contaminated absorbing medium or soil in a
watertight box/container and close it tight.
u Contact an authorized waste management company.
u Dispose of all contaminated material in accordance
with the applicable environmental regulations.
To Next Page
Loading...
General