Safety and operating instructions
© Anbaufräsen PC GmbH | 3390 5221 01 | 2020-09-07
Original Instructions
45
7.1 Maintenance works not
allowed by the manufacturer
Some maintenance activities must be carried out exclu-
sively by the manufacturer. If such maintenance activi-
ties are required, consult the authorized Customer cen-
ter / Dealer in your area in order to ensure that they pro-
ceed safely.
The following maintenance activities are not allowed by
the manufacturer:
• Repairs to the gear and hydraulic motor
• Replacing wear sleeves and pick boxes
• Welding work on the cutter drums
• Welding work on the gear housing
To Next Page
Loading...
General