EasyManuals Logo
Home>Epiroc>Cutter>ER-L Series

Epiroc ER-L Series User Manual

Epiroc ER-L Series
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
Safety and operating instructions
© Anbaufräsen PC GmbH | 3390 5221 01 | 2020-09-07
Original Instructions
69
11 Disposal
WARNING Risk of injury due to improper disas-
sembly
Stored residual energy, sharp-edged parts, pointed tips
and corners on or in the machine or on the requisite
tools can cause injuries.
u Prior to starting work ensure that there is adequate
free space.
u Handle parts with exposed sharp-edges carefully.
u Ensure order and cleanliness at the place of work!
Loosely stacked or scattered parts and tools can
cause accidents.
u Disassemble parts correctly. Be aware of the weight
of parts. These may be heavy. If necessary use lift-
ing gear.
u Secure parts so that they do not fall or topple.
u Consult the authorized Customer Center / dealer in
your area in case of ambiguities.
NOTICE Environmental damage due to consumables
Hydraulic and gear oil are environmentally harmful and
must not penetrate the ground or enter the water table or
water supplies.
u Collect any such consumables which may escape.
u Dispose of them in accordance with the applicable
environmental regulations.
11.1 Drum cutter
n
Switch off the drum cutter and secure against a
restart.
n
Remove the drum cutter from the carrier (see chapter
Removing the hydraulic attachment from the car-
rier).
n
Remove the adapter plate (see chapter Removing
the hydraulic attachment from the carrier ).
n
Remove the hydraulic hoses from the drum cutter.
n
Clean the drum cutter (see chapter Cleaning).
n
Dispose of the drum cutter in line with all applicable
regulations or consult an authorised and specialised
recycling company.
11.2 Hydraulic hoses
n
Drain the hydraulic oil from the hydraulic hoses and
collect it.
n
Dispose of the hydraulic hoses in accordance with
the applicable regulations to avoid environmental
hazards.
11.3 Hydraulic oil
n
Collect any hydraulic oil that escapes.
n
Dispose of it in accordance with the applicable envi-
ronmental regulations.
11.4 Gear oil
n
Collect any gear oil which escapes.
n
Dispose of it in accordance with the applicable envi-
ronmental regulations.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epiroc ER-L Series and is the answer not in the manual?

Epiroc ER-L Series Specifications

General IconGeneral
BrandEpiroc
ModelER-L Series
CategoryCutter
LanguageEnglish