EasyManuals Logo
Home>Epiroc>Cutter>ER-L Series

Epiroc ER-L Series User Manual

Epiroc ER-L Series
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Safety and operating instructions
42 © Anbaufräsen PC GmbH | 3390 5221 01 | 2020-09-07
Original Instructions
6.6 Prohibited operation
n
Do not activate the drum cutter with the carrier in
driving operation.
6.6.1 Cylinder end positions
n
Reposition the carrier to avoid working with the cylin-
der in its end positions.
Avoid operating the hydraulic attachment when the
carrier stick and bucket cylinder are in one of their
end positions. These end positions have damping fa-
cilities; the hydraulic cylinder may be damaged by
prolonged use while in its end positions.
6.6.2 Moving the carrier
n
Never relocate the carrier sideways by placing the
hydraulic attachment on the ground to lift the carrier.
This would seriously damage the hydraulic attach-
ment.
6.6.3 Lifting/Transporting
n
Never use the hydraulic attachment to lift or transport
loads.
The hydraulic attachment was not constructed to lift
or transport loads. This would damage the hydraulic
attachment.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epiroc ER-L Series and is the answer not in the manual?

Epiroc ER-L Series Specifications

General IconGeneral
BrandEpiroc
ModelER-L Series
CategoryCutter
LanguageEnglish