When to perform Component to be replaced
See manual to clean scale and change
air filter. is displayed
DAir filter
*
U “Cleaning the scale and replacing the filter” on page 69
You can check the procedure in a video on YouTube.
Epson Video Manuals
Ink Low is displayed, as soon as you can
E Ink cartridge
U “Shaking and Replacing Ink Cartridges” on page 83
* Replace the air filter when cleaning the scale.
Other maintenance
When to perform Operation
Remove and shake WH ink is displayed
Shake White ink cartridge
U “Shaking” on page 83
Once a month Shake color ink cartridges
U “Shaking” on page 83
❏ When checking if nozzles are clogged
❏ When checking which colors are
clogged
❏ Horizontal stripes or tint unevenness
(banding) are appeared.
Checking for clogged nozzles
U “Checking for clogged nozzles” on page 78
❏ When printouts are blurred or parts
are missing
❏ When a clog is found after checking
for clogged nozzles
Cleaning the print head
U “Cleaning the print head” on page 80
When the printouts are grainy or out of
focus
Head Alignment
Offset Head Alignment
Feed Adjustment
U “Correcting the print misalignment” on page 82
When changing the ink mode Change the ink mode
U “Replacing White Ink” on page 74
When the printer will not be used for an
extended period (and switched off)
Pre-Storage Maint.
U “Prolonged Storage” on page 77
❏ When nozzles remain clogged even
after cleaning the print head several
times
❏ When there is not enough white in
white ink mode, or when white results
in uneven print results
Tube Washing
U “Tube Washing” on page 91
SC-F2100 Series User's Guide
Maintenance
62