Load the T-shirt (media)
If you notice any creases on the T-shirt, use the heat
press to iron them out before you start printing.
When loading a T-shirt on a grip pad covered platen, do
not use the frame supplied. If you use a frame with a grip
pad covered platen, you cannot secure the T-shirt
correctly. See the next section for information on
loading.
To load a T-shirt (media) on a platen without a grip pad,
use the frame supplied when loading. See the following
for information on loading.
L, M, S, and XS size platens U “Loading on a Platen
without a Grip Pad” on page 47
Sleeve platen U “Loading on Sleeve Platens” on
page 50
Medium grooved platen U “Loading on Medium
Grooved Platens” on page 51
Loading on a Grip Pad Covered
Platen
You can check the procedure in a video on YouTube.
Epson Video Manuals
Buttons that are used in the following operations
A
Press the P button to turn on the printer.
B
Check that the platen is ejected forward.
If it is not ejected, press the } button to move the
platen forward.
C
Load the T-shirt so that the shoulders are at the
front.
D
Pull the parts of the shirt that extend beyond the
platen to flatten the print surface.
c
Important:
Do not pull too hard on the T-shirt. If the
T-shirt is stretched too much, the print quality
may decline due to deformed images and so
on, and the white under-base print may
extend outside the image.
SC-F2100 Series User's Guide
Basic Printing
45
To Next Page
Loading...
Need help?
General