Fronius MagicWave 3000 User Manual

Technical data
Special voltages
CAUTION!
An inadequately dimensioned electrical installation can cause serious damage.
▶
The mains lead and its fuse must be dimensioned accordingly.
The technical data shown on the rating plate applies.
Overview with
critical raw
materials, year of
production of the
device
Overview with critical raw materials:
An overview of which critical raw materials are contained in this device can be found at
the following Internet address.
www.fronius.com/en/about-fronius/sustainability.
To calculate the year of production of the device:
- Each device is provided with a serial number
- The serial number consists of 8 digits - for example 28020099
- The first two digits give the number from which the year of production of the device
can be calculated
- This figure minus 11 gives the year of production
• For example: Serial number = 28020065, calculation of the year of production =
28 - 11 = 17, year of production = 2017
MagicWave 2200
Comfort
Mains voltage 230 V
Mains voltage tolerance -20% / +15%
Grid frequency 50/60 Hz
Mains fuse protection (slow-blow) 16 A
Mains connection
1)
No restrictions
Primary continuous power (100% D.C.
2)
)
3.7 kVA
Cos phi 0.99
Welding current range
TIG 3 - 220 A
Electrode 10 - 180 A
Welding current at
10 min/25 °C (77 °F) 40% D.C.
2)
220 A
10 min/25 °C (77 °F) 60% D.C.
2)
180 A
10 min/25 °C (77 °F) 100% D.C.
2)
150 A
10 min/40 °C (104 °F) 35% D.C.
2)
220 A
10 min/40 °C (104 °F) 60% D.C.
2)
170 A
10 min/40 °C (104 °F) 100% D.C.
2)
150 A
Open circuit voltage 88 V
198

Fronius MagicWave 3000 Specifications

General

Brand	Fronius
Model	MagicWave 3000
Category	Portable Generator
Language	English