Fronius MagicWave 3000 User Manual

TransTig
4000 / 5000 Com-
fort
TransTig 4000
(1)
(2)
(3)
(4)
TransTig 4000 / 5000 Comfort - front
(7)
(6)
(5)
(8)
(6)
TransTig 4000 / 5000 Comfort - rear
No
.
Function
(1) (+) current socket with bayonet latch
for connecting
- the grounding cable when TIG welding
- the electrode cable or grounding cable during MMA welding (depending on
the type of electrode)
(2) LocalNet connection
standardised connection socket for system add-ons (e.g. remote control, Job-
Master TIG welding torch, etc.)
(3) Torch control connection
- for connecting the control plug of a conventional welding torch
- input for the collision protection signal when a robot interface or field bus
coupler is connected
(4) (-) current socket with bayonet latch
for connecting
- the TIG welding torch
- the electrode cable or grounding cable during MMA welding (depending on
the type of electrode)
(5) Mains switch
for switching the power source on and off
OFF = - O -
ON = - I -
(6) Blanking covers
reserved for LocalNet connection
(7) Mains cable with strain relief device
(8) Shielding gas connection
34

Fronius MagicWave 3000 Specifications

General

Brand	Fronius
Model	MagicWave 3000
Category	Portable Generator
Language	English