Fronius MagicWave 3000 User Manual

Unit mm in.
Setting range OFF - max. OFF - max.
Factory setting 2.4 0.1
Preparation
1
Plug in the mains plug
CAUTION!
Risk of injury and damage from electric shock.
As soon as the mains switch is in the "I" position, the tungsten electrode of the welding
torch is live.
▶
Ensure that the tungsten electrode does not touch any persons or electrically con-
ductive or earthed parts (e.g. housing, etc.).
2
Move the mains switch to the "I" position
The starting sequence with the Fronius logo, current firmware version and Fronius
internet address is displayed for approx. 1 second:
TIG welding
1
Press the Mode button to select the required TIG mode:
2-step mode
4-step mode
The image for the TIG welding parameter is shown on the display:
TIG welding parameters for 2-step mode (main cur-
rent welding parameter selected)
TIG welding parameters for 4-step mode (main cur-
rent welding parameter selected)
54

Fronius MagicWave 3000 Specifications

General

Brand	Fronius
Model	MagicWave 3000
Category	Portable Generator
Language	English