[Maintenance]
113
[Adjust Fusing Temperature]
Adjusts the fusing temperature per paper type.
The separation of an image or curl of paper, which occurs depending on the paper type or
environment, may improve owing to the fusing temperature adjustment.
[Ink Setoff Prevention]
Set whether or not to activate the function to prevent the adhesion of sheets of paper.
[Clean Developer Unit and Transfer Module]
After the device has been remained with powered on but not perform printing for a certain
period, the background of the print result may have some unwanted colored parts. To
improve this fault, clean the Developer Unit and the Transfer Module.
[Toner Density Settings]
Adjusts the amount of toner to consume when printing. Reducing the density saves toners
and increasing makes the printed image clearer.
[Refresh Toner]
Re-adjusts the toner density and the developer voltage. Refreshing toners optimizes the
print quality.
Do not perform Refresh Toner too many times as the toner would decrease at a fast pace.
[Adjust Image Transfer]
You can specify the transfer output value for each paper type. This is useful when the toner
image does not transfer to the paper properly.
For more information, refer to "Adjust Image Transfer" (P.217).
To Next Page
Loading...
Need help?
General
