[System Settings]
123
The following items are printed at the bottom right for Preset 1 or bottom left for Preset
2 of paper.
- First line: file name and the IP address of the computer that send a print job
- Second line: user name, user ID, card ID, and date and time
Preset 3 and Preset 4
The string registered on [Create Text String 1] is printed as watermark at an angle in the
center of paper.
The following items are printed at the bottom right for Preset 3 or bottom left for Preset
4 of paper.
- User ID and date and time
Some items may not be printed depending on the job type and performance conditions.
Force annotation is not printed on blank paper generated by the device.
A time printed as a watermark using the Force Annotation feature may differ from the time the print job is
submitted depending on the status and settings of the device and the contents of the print job. In this case,
the print job start time is printed as a watermark.
For how to register text strings, refer to "[Create Text String]" (P.123).
[Apply Layout Template to Copy / Print Jobs]
Set the association between jobs and layout templates.
You can associate a layout template with Client Print when a print job is sent from a computer.
You can associate a layout template with the media print feature when printing a file in a USB memory.
[Delete Layout Template]
Deletes a layout template.
The provided layout templates cannot be deleted.
[Create Text String]
Register text strings for the Force Annotation feature.
The available text for the provided layout templates is the text strings registered in [Create Text String 1].
[Print Universal Unique ID]
You can print UUIDs (Universal Unique IDs) for each print job to identify each job.
Preset1
DocName-192.0.2.1
UserName-CardID-UserID-2012/02/01 13:08
Preset2
DocName-192.0.2.1
UserName-CardID-UserID-2012/02/01 13:08
Preset3
UserID-2012/02/01 13:08
Preset4
UserID-2012/02/01 13:08
To Next Page
Loading...
Need help?
General
