3 Basic Operations
62
Textile transfer paper
Paper whose reverse side is printed in solid color
Pressure sensitive paper
Soft paper such as the one whose paper fiber orientation is parallel to the short side of
the paper
Embossed paper
Perforated paper
Some other print media may be unacceptable. For details, contact our Customer Support
Center.
Storing and Handling Paper
Storing Paper
Store paper inside a cabinet or other dry place. Paper that has absorbed moisture can
result in paper jams and lower image quality.
After opening a package of paper, wrap and store any remaining paper.
Store paper on a flat surface to prevent bends or warping.
Store paper avoiding direct sunlights.
Handling Paper
Align the stack of paper neatly before setting it in a tray.
Do not load paper of mixed sizes together into a tray.
Do not load paper that is wavy or curling.
Types of paper loaded in trays
The device automatically detects the size and orientation of loaded paper in a tray, but not
a paper type. Normally, each tray is set to plain paper. When loading paper other than plain
paper, you must change the paper type setting. You can name paper types and can set up
to five paper types as user-defined paper.
Do not load paper of mixed sizes together into a tray.
The device cannot detect the size and orientation of the loaded paper in Tray 5 (Bypass).
For information on the paper type settings, refer to "Changing the Paper Settings" (P.69).
For information about paper size, refer to "[Paper Size Settings]" (P.127).
Adding paper
When the device runs out of paper during printing, a message is displayed on the touch
screen. Add paper according to the message instructions. Printing resumes when paper is
added.
To prevent paper jams or erroneous detection of loaded paper in a tray by the device, do not add paper on
top of any remaining paper in the tray. Remove any remaining paper from the tray, and then load that paper
on top of the newly loaded paper.
To Next Page
Loading...
Need help?
General
