Fuji Xerox ApeosPort-VII P5021 User Manual

[Connectivity & Network Setup]
141
[Internet Services (HTTP)]
 [Port Status]
Select [Enabled] to use CentreWare Internet Services.
Reference

For more information about CentreWare Internet Services, refer to "Using CentreWare Internet Services"
(P.56).
 [Port Number]
Enter a port number for the Internet Services.
Important

Do not use a number that is the same as a port number of another port. However, you can use the same port
number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP, and Web Services on
Devices (WSD)).
Note

You cannot select [Port Number], if HTTP port is disabled. To configure [Port Number], enable port status and
reboot the device, and then configure [Port Number].
[SOAP]
 [Port Status]
Select [Enabled] to use the SOAP port.
 [Port Number]
Enter a port number for SOAP.
Important

Do not use a number that is the same as a port number of another port. However, you can use the same port
number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP, and Web Services on
Devices (WSD)).
[ThinPrint]
 [Port Status]
You can use the device for print in the ThinPrint environment. The device decompresses and
prints the compressed print data sent from the server (Windows Server).
 [Port Number]
Enter a port number for ThinPrint.
Important

Do not use any numbers assigned to the other ports.
Note

ThinPrint is available when the communication protocol uses IPv4.

The maximum of three connections are possible at a time.
[Wireless LAN Settings]
You can make the settings for the wireless LAN communication.
Reference

For information on the setting procedures, refer to the manuals accompanying the Wireless Network Kit
(optional).

Fuji Xerox ApeosPort-VII P5021 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII P5021
Category	Printer
Language	English