Fuji Xerox ApeosPort-VII P5021 User Manual

[Connectivity & Network Setup]
147
[HTTPS Proxy Server Password]
Enter a password of the HTTPS proxy server. Up to 31 characters are allowed.
[HTTP Proxy Server Name]
Enter the server name or IP address of the HTTP proxy server. Up to 255 characters are
allowed. You can specify the addresses by IPv4 address, IPv6 address, and FQDN.
[HTTP Proxy Server Port Number]
Set the HTTP proxy server port number from 1 to 65535.
Important

Do not use the numbers assigned to the other ports.
[HTTP Proxy Server Authentication]
Select [Enabled] when authentication is required to connect to the HTTP proxy server.
[HTTP Proxy Server Login Name]
Enter a login name of the HTTP proxy server.
[HTTP Proxy Server Password]
Enter a password of the HTTP proxy server.
[Outgoing / Incoming Email Settings]
[POP3 Server Settings]
 [Server Name / IP Address]
Enter a server name or IP address.
 [Port Number]
Enter a port number.
 [Polling Interval]
Set the interval for checking the email on the POP3 server.
 [Login Name]
Enter the name to log in to the POP3 server.
 [Password]
Enter a password for the POP3 server.
 [POP Password Encryption]
Select whether or not to encrypt the password.
[SMTP Server Settings]
You can check the connection between the device and the SMTP server by sending a test
mail to the email address specified in [Connection Test]. Selecting [Connection Test] >
[Print SMTP Comm Report] outputs the report that shows the contents of protocol of the
SMTP communication transmitted and received by the device.

Fuji Xerox ApeosPort-VII P5021 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII P5021
Category	Printer
Language	English