TOOLS AND AUXILIARY EQUIPMENT
114 OI 248 (EN) REV6 /REV7
A2.6 Locking Adhesives for Installation, Commissioning and Maintenance
The following table describes how locking adhesives are to be used
and applied. Each application is referred in the text of the instruc-
tion manual by its abbreviation (e.g.: locked per S1).
1)
The amounts required for installation and commissioning are sup-
plied by the manufacturer and are included in the breaker shipment.
A2.7 Measuring Devices for Checking Gas Quality
Abbre-
viation
Name of Locking Adhe-
sive
Function Application
S1 Loctite 243 Medium strength th-
readlocker
Apply a light coating of lok-
king adhesive to the first
few threads only. The cure
time is 30 minutes at room
temperature. Low tem-
peratures require a longer
cure time
1)
Tool Description Illustration
T200 Dew point hygrometer
T201 SF
6
analyzer, type AW
T202 Acidity detector tube (10 each)
For use with T201
T203
SF
6
volume percentage measuring device
To Next Page
Loading...
Need help?
General
