GE PROPRIETARY TO GE
D
IRECTION 5308917-100, REVISION 8 LOGIQ P3 SERVICE MANUAL
5-4 Section 5-1 - Overview
5-1-3 General Information
• LOGIQ P3 is an ultrasound imaging scanner.
• The system can be used for:
- 2D Black and White imaging
- 2D Color Flow
- M-Mode Black and White imaging
- Doppler
- A number of combinations of the above
• LOGIQ P3 is a digital beam forming system that can handle up to 192 elements linear probes.
• Signal flow from the Probe Connector Panel to the Front End, to the Mid Processors and (TMST)
and finally to the LCD and peripherals.
• System configuration is stored on a hard disk and all necessary software is loaded from the hard
disk on power up.
To Next Page
Loading...
Need help?
General
