Troubleshooting
2031504-159D MAC™ 800 3-23
Passwords
Q: The system was set up for High Security Mode and I forgot my
password. How do I access the system?
A: Use the following steps:
1. Contact GE Tech Support and provide the serial number of the
device you want to access.
They will generate a temporary, device-specific name and password
that can only be used for 24 hours.
2. Log into the system with the password provided by GE Tech Support.
3. Immediately after logging into the system, verify your MAC 800 user
name and password. Record this information and store in a secure
location for future reference.
Serial Number
Q: When the mainboard is replaced, how do I reenter the serial number
to the new mainboard?
A: Use the following steps:
1. From the Main Menu, select F4 (System Configuration) > F6 (More)
> F6 (More) > F5 (Service).
The system prompts for the service password.
2. Type 7763 and press Enter.
The service window opens.
3. Move the focus to Device Settings and press Enter.
The Device Settings window opens.
4. Enter the unit’s serial number and press Enter.
The unit’s serial number is located on the product label on the bottom
of the device.
Clinical
Resting ECG Report Format
Q: How do I change the way an ECG looks (format) when it prints out?
A: Do the following.
1. From the Main Menu, press F4 to select System Configuration.
2. Press F2 to select Resting ECG Setup.
3. Press F4 (Page Down) three times.
To Next Page
Loading...
Need help?
General
