4-16 MAC™ 800 2031504-159D
Maintenance
Replacing the Mainboard Assembly
Processing ECGs in Internal Storage
If the system has the internal storage option, process any ECGs
remaining in storage by transmitting to your archival system and/or
print them to ensure you have a printed record before proceeding with
the mainboard replacement.
Saving System Configuration Settings
1. Store the System Configuration settings to an SD card.
a. Insert SD card in the SD card slot.
b. From the Main Menu, press F4 to select System Configuration.
c. Press F6 (More) > F6 (More) > F3 to select Export Setup.
d. Highlight the system setup file you want to export to the SD
card.
e. Press F1 to select Export.
f. When the Configuration was successfully exported message is
displayed, press F6 to select OK.
g. Remove the SD card and store in a secure location.
2. Print the System Setup Report if you feel you may need it for
additional reference after the FRU replacement procedure.
a. From the Main Menu, press F4 to select System Configuration.
b. Press F6 (More) > F3 to select Print Setup Report.
c. Move the focus to the Complete Setup button and press Enter.
d. Save the printed setup report in a secure location. It can be used
as a reference if System Setup needs to be restored manually.
Removing the Mainboard Assembly
1. Disconnect the system from AC power.
2. Remove the battery assembly as described in “Replacing the Battery
Assembly” on page 4-7.
3. Remove the top cover assembly as described in “Replacing the Top
Cover Assembly” on page 4-9.
4. Remove the LCD assembly as described in “Replacing the LCD
Assembly” on page 4-12.
5. Disconnect the printer cable from the mainboard.
To Next Page
Loading...
Need help?
General
