HEIDENHAIN TNC 620 Programming Station User Manual

MOD Functions | Setting up data interfaces
19
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
755
Setting the operating mode of the external device
(fileSystem)
The load all programs, load offered program, and load
directory functions are not available in the FE2 and FEX
operating modes.
Icon External device Operat-
ing
mode
PC with HEIDENHAIN TNCremo data
transfer software
LSV2
HEIDENHAIN floppy disk units FE1
Non-HEIDENHAIN devices such as
printers, scanners, punchers, PC
without TNCremo
FEX
Software for data transfer
For data transfer to or from the control, you should use the
HEIDENHAIN TNCremo software. With TNCremo, data transfer is
possible with all HEIDENHAIN controls via the serial interface or
the Ethernet interface.
You can download the current version of the TNCremo
software from the HEIDENHAIN homepage.
System requirements for TNCremo:
PC with 486 processor or higher
Windows XP, Windows Vista, Windows 7, Windows 8 operating
system
16 MB RAM
5 MB free memory space on your hard disk
An available serial interface or connection to the TCP/IP network
Installation under Windows
Start the SETUP.EXE installation program with the file manager
(Explorer)
Follow the setup program instructions
Starting TNCremo under Windows
Click on <Start>, <Programs>, <HEIDENHAIN Applications>,
<TNCremo>
When you start TNCremo for the first time, it automatically tries to
set up a connection with the control.

HEIDENHAIN TNC 620 Programming Station Specifications

General

Brand	HEIDENHAIN
Model	TNC 620 Programming Station
Category	Control Systems
Language	English