Introduction | Window manager
2
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
117
VNC
Use the VNC function to configure the behavior of the various VNC
clients. This includes, for example, operation via soft keys, mouse
and the ASCII keyboard.
The control provides the following options:
List of permitted clients (IP address or name)
Password for the connection
Additional server options
Additional settings for assigning the focus
Refer to your machine manual.
For multiple clients or operating units, the focus
assignment procedure depends on the design and the
operating situation of the machine.
This function must be adapted by your machine
manufacturer.
Opening the VNC settings
Proceed as follows to open the VNC settings:
Open the task bar at the bottom edge of the screen
Further information: "Window manager", page 107
Press the green HEIDENHAIN button to open the JH menu
Select the Settings menu item
Select the VNC menu item
The control opens the VNC Settings pop-up window.
The control provides the following options:
Add: Add new VNC viewer/client
Remove: Deletes the selected client Only possible with
manually entered clients.
Edit: Edit the configuration of the selected client
Update: Updates the display. Required with connection
attempts during which the dialog is open.
VNC settings
Dialog Option Meaning
Computer name:
IP address or computer name
VNC:
Connection of the client to the VNC viewer
VNC Focus
The client participates in the focus assignment
VNC participant
settings
Type
Manual
Manually entered client
Denied
This client is not permitted to connect
TeleService/IPC 61xx
Client via TeleService connection
DHCP
Other computer that obtains an IP address from this computer
To Next Page
Loading...
Need help?
General
