HEIDENHAIN TNC 640 User Manual

MOD Functions | System settings
20
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
853
20.5 System settings
Set the system time
With the Set the system time MOD function you can set the time
zone, date and time manually or with the aid of an NTP server
synchronization.
Proceed as follows to set the system time:
In the MOD menu, select the System settings group
Press the SET DATE/ TIME soft key
In the Time zone area, select the desired time zone
Press the NTP on soft key in order to select the Set the time
manually entry
Change the date and time as needed
Press the OK soft key
To set the system time with the aid of an NTP server:
In the MOD menu, select the System settings group
Press the SET DATE/ TIME soft key
In the Time zone area, select the desired time zone
Press the NTP off soft key in order to select the Synchronize
the time over NTP server entry
Enter hostnames or the URL of an TNP server
Press the Add soft key
Press the OK soft key

HEIDENHAIN TNC 640 Specifications

General

Control Type	CNC
Axes	Up to 18 axes
Interfaces	Ethernet, USB, RS-232
Spindle Control	Yes
PLC	Integrated
Storage	SSD
Programming Languages	DIN/ISO
Safety Features	safety functions according to EN ISO 13849-1
Dimensions	Varies based on configuration
Weight	Varies based on configuration
Operating System	Windows