Control Panel User Manual
126
2. Click dropdown menu to select a Zone needs to be configured.
3. Select a tampering type.
4. Check the Upload Alarm Recovery Report checkbox to enable the function of
uploading alarm recovery report.
5. Select the linked siren on the Linked Siren panel.
6. Select the linked trigger on the Linked Trigger panel.
7. Click Copy to to copy all these settings to other Zones.
8. Click Apply to save the settings.
Remote Control Permission Configuration
Steps:
1. Enter the remote control permission configuration interface.
Remote Configuration->Alarm->Remote Control Permission
To Next Page
Loading...
Need help?
General
