Control Panel User Manual
35
3.1.6 Alarm Receiver Phone Number Settings
The control panel supports two dialing accounts. The maximum length of
dialing number of each account is 31 digits. The command is shown as follows.
{1} Programming Address of Phone Number of Alarm Connecter:
460~463
Alarm Center1
Phone Number
Programming
Address
Alarm Center2
Phone Number
Programming
Address
A telephone number is separated into two segments. The 460 and 461 group
represents the dialing number which is connected with alarm center1. The
462 and 463 group represents the dialing number which is connected with
alarm center2.
{2} The dialing number is 16 digits.
All the telephone number should be end with *4.
The length of the each center number is 31 digits, and the
entering format should be {No.} + {Dwell Time} + {ext.No.}
The default center number is
E0000000000000000000000000000000.
{3} End the command.
Example 1:
If the tele-phone number is 0571-88075998, you can enter
460057188075998*4# with the keypad for completing the configuration.
Example 2：
If the telephone number is 17951-88075998, there are two steps to set the
To Next Page
Loading...
Need help?
General
