Control Panel User Manual
55
3.1.25 Public Partition Settings
The programming commands of public partition settings are as below:
{1} The public partition settings address is 563.
{2} Enable/Disable public partition.
{3} Linked System No.1.
{4} Linked System No.2.
{5} End the command.
3.1.26 Fault Detection Configuration
Control Panel System Fault Detection Configuration
To configure control panel system fault detection, please see the command
below.
564 1 1 1 1 1 1 1 #
1 2
4
63 5
7
8
9
{1} Control panel system fault detection address: 564.
{2} Ac Power Down
{3} Low Battery
{4} Control Panel Tampering Alarm
{5} Phone Line Disconnection
{6} Main keypad Disconnection
To Next Page
Loading...
Need help?
General
