Control Panel User Manual
96
address and port number.
Steps:
1. On the Device Management interface, click and select a control panel in the
device list.
2. Click on the Modify button on the upper side of the list to enter the device
modify interface.
3. Enter the required nick name, address, and port number and then enter the
admin username and password.
4. Click Modify to save the changes.
Delete a Device
Select device from the list, click Modify/Delete, and then you can modify/delete the information of
the selected device.
4.4 Remote Configuration
Purpose:
In this section, you are able to configure device parameters remotely.
Click the Remote Configuration button to enter the interface.
To Next Page
Loading...
Need help?
General
