HIKVISION DS-19A08-F/Kx User Manual

Control Panel User Manual
127
2. Click the icon to enter the remote control permission configuration page.
3. Check the Enable checkbox to enable the configuration
4. Enter the serial number of the remote control.
5. Select the partition No. needs to be controlled.
6. Check the checkbox and select the permission for the remote control.
7. Click Apply to save the settings.
4.5 Fault Handling
In this section , you can select the fault detection type, alarm linked keypad and
output mode.

HIKVISION DS-19A08-F/Kx Specifications

General

Brand	HIKVISION
Model	DS-19A08-F/Kx
Category	Control Panel
Language	English