Control Panel User Manual
69
When the Zone No. has no hundreds’ digit, {4} can be omitted.
Example: When you want to send report of Zone No.16. The
command is 68601116#.
When the Zone No. has no hundreds’ digit and tens’ digit, {4} and
{5} can be omitted.
Example: When you want to send report of Zone No.8. The
command is 6860118#.
{7} End the command.
After operating once, you can continuously configure with the command of
{Project} + {Zone No.} + {#}
3.1.29 Schedule Configuration
Enabling Weekly Schedule
To enable the weekly schedule, please refer to the command below.
{1} Enabling Weekly Schedule Command Address: 690.
{2} Partition Number, 01~08 indicate partitions No.1~No.8.
{3} Enable/Disable Mandatory Arming
{4} It indicates to enable/disable the weekly schedule.
To Next Page
Loading...
Need help?
General
