Control Panel User Manual
95
When opening iVMS-4200 after registration, you can log in the software with the registered user name
and password.
Steps:
1. Input the user name and password you registered.
2. Optionally, check the checkbox of Enable Auto-login to log in the software automatically.
3. Click Login.
4.3 Network Security Control Panel Settings
Purpose:
In this section, you are able to configure or view the basic parameters (such as the
system information, alarm information, network data, device status and so on) of
the video security control panel.
4.3.1 Add/Edit/Delete the Device
Add a Device:
Steps:
1. Click Add Device to open the device adding dialog box.
2. Select IP/Domain as the adding mode.
3. Input the required information.
Nickname: Edit a name for the device as you want.
Address: Input the device’s IP address or domain name.
Port: Input the device port number. The default value is 8000.
User Name: Input the device user name.
Password: Input the device password.
4. Optionally, you can check the checkbox Export to Group to create a group by the device name.
All channels and alarm inputs of the device will be imported to the corresponding group by
default.
5. Click Add to add the device.
Edit a Device
Purpose:
You can edit the device information in this section, including the device name,
To Next Page
Loading...
Need help?
General
