DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
125
Managing System
Upgrading the System Firmware
The system firmware for your DVR can be updated from a USB storage device or FTP.
To update the system firmware from a USB storage device:
1. Enter the Upgrade menu by going to Menu > Maintenance > Upgrade.
2. Select the Local Upgrade tab, as shown in Figure 140.
Figure 140 Local Upgrade Menu
3. Connect the USB storage device to a USB port on the DVR.
4. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
5. Select the firmware file. The firmware file is named digicap.mav.
6. Click the Upgrade button to upgrade the DVR. The DVR will automatically reboot after the
upgrade is completed. If you do not wish to upgrade at this point, click the Cancel button.
To update the system firmware from FTP:
1. Enter the Upgrade menu by going to Menu > Maintenance > Upgrade.
2. Select the FTP Upgrade tab, as shown in Figure 141.
To Next Page
Loading...
Need help?
General