DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
38
Start Recording: Click the Continues Record/Event Record item. This will bring up an attention box
shown below. If you click yes, it will start all-day continues/event recording of all channels.
Output Mode: Click the Output Mode item. This will bring up an Output Mode menu shown below.
Four modes are available: Standard, Bright, Gentle and Vivid. Select one and click the Apply button to
save the setting.
Note:
Before you start Auto-switch, you should set Dwell Time in Live View setting menu by going to Menu >
System Configuration > Live View > General.
Note:
After 20 seconds of inactivity, the DVR will automatically exit out of the Display menu and go back into
the Live Feed mode.
Note:
The auto lock menu setting is selected by default, meaning the Admin password must be enter to exit out
of the Live Feed into the Main Menu.
Configuring Live Feed Displays
Live Feed displays can be customized to your own needs.
To customize display settings:
1. Set language, CVBS output standard, resolution and so on by going to Menu > System
Configuration > General > Display, as shown in Figure 30.
To Next Page
Loading...
Need help?
General