DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
128
Exporting & Importing Configuration
Configuration information from your DVR can be exported to a USB storage device and imported into
another DVR. This will allow you to efficiently setup the same configuration on numerous DVRs.
To export DVR configuration:
8. Enter the Import/Export menu, shown in Figure 143 by going to Menu > Maintenance >
Import/Export.
Figure 143 Import/Export Menu
9. Connect the USB storage device to a USB port on the DVR.
10. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
11. You can click the New Folder button to create a new folder.
12. Select the location where you would like the configuration to be stored on the USB storage
device.
13. Click Export to export a configuration file to USB storage device. The configuration file will be
named devCfg.bin.
14. Click to exit out of the Import / Export menu.
To import DVR configuration:
8. Enter the Import/Export menu, shown in Figure 143 by going to Menu > Maintenance >
Import/Export.
9. Connect the USB storage device to a USB port on the DVR.
10. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
11. Select the configuration file. The configuration file is named devCfg.bin.
12. Click the Import button.
13. In the pop-up window click Yes to confirm the import and the system will automatically reboot to
make it effective
14. Click to exit out of the Import/Export menu.
To Next Page
Loading...
Need help?
General