DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
74
To edit a user:
1. Enter the User menu, shown in Figure 71 by going to Menu > System Configuration > User.
2. Select a user and click to edit user.
3. Edit user information including user name, password, level and MAC address.
4. Click the OK button to save and exit.
Note:
User password can be both numbers and characters. You can click the button on the password
editable fields to enter characters.
Switch User
On the main menu (see in Figure 72), information about users are show on the lower left
corner, , click to switch users.
Figure 73 Main Menu
To Next Page
Loading...
Need help?
General