DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
57
Note:
Up to 16 channels can be played back at the same time.
Smart search
In order to locate motion detection event easily and accurately in the playback progress line, the users are
allowed to analyze a certain area (scene) dynamically, and to get all of the related motion detection events
that occurred in this area.
Note:
The smart search function is only available for analog channels.
To use this function:
1. Enter the playback interface and play the video.
2. Move your mouse into the video window and drag an area for motion detection analysis .The
button is used for clearing all the area, and the button is used for choosing the full
screen area.
3. After selecting the area, click to search, you will get the motion detection events easily from
the long time line. Time line turns to red when motion detection events happen.
4. You can get the scene you need conveniently by moving the green vertical line or you can click
and to move between the neighbor events.
5. You can also do the smart search in Full Screen mode, as shown in Figure 51 by clicking to
pop-up the tool bar as .
Playing Back Pictures
Search and view captured pictures stored in HDD. To playing back pictures:
1. Enter the Picture interface, shown in Figure 52 by going to Menu > Playback > Picture.
Figure 52 Picture Playback Interface
2. Select channel on Channel the dropdown list.
3. Select picture type for Continues, Event, Capture or All.
To Next Page
Loading...
Need help?
General