Volara™ System, Model PVL1 User Manual (196286 REV C) 95
Storage and Handling
SHIPPING AND PACKAGING
WARNING:
To help prevent injury and/or equipment damage, obey these warnings:
• Warning—Do not ship the battery with over a 30% charge.
• Warning—Do not store the battery at temperatures above 140°F
(60°C), such as inside of a car on a hot day or in direct sunlight.
CAUTION:
Caution—If shipping is required, the original packing material provides
the best protection for the system. Keep the original packing material.
Failure to do so could cause equipment damage.
If shipping is required, ship the unit in its original packing material. When
the system has reached the end of its useful life, discard the system in
accordance with local and federal standards.
SHIPPING FOR REPAIR
When the control unit is shipped for repair, follow these shipping and
packaging instructions:
• Request and get a return material authorization (RMA) number from
Hill-Rom.
You will get a return kit in the mail.
1. Clean and disinfect the unit. Make sure it is dry before you pack it. See
“Clean the Control Unit and Stand with Cart” on page 80.
2. Follow the instructions in the return kit to pack the unit.
3. Close and seal the box, and apply the applicable labels on the outside
of the box.
4. During shipment, the unit should be kept dry and kept at
temperatures of -4° F to 140° F (-20° C to 60° C).
196654__C_2019-Apr-29_Cleaned
To Next Page
Loading...
Need help?
General
