Volara™ System, Model PVL1 User Manual (196286 REV C) 31
Volara™ Therapy
Start a Therapy in Automatic Mode
NOTES:
• Before you start a therapy, make sure you have connected the
appropriate patient circuit to the system. “Connect the Volara™
Patient Circuit” on page 17.
• Make sure the patient circuit is put into position on the patient. See
Step 7 on page 18.
1. Press Automatic.
• If prompted, scan the patient’s ID
barcode with the paired barcode
reader. For pairing instructions, see
page 51.
The last used preset therapy is selected.
2. To continue with this therapy, press
Start. Or, follow these steps to select
another preset—
a. Swipe the Options tab left, and
press the Care Plan menu control.
b. Select the preferred preset therapy
plan.
c. Review the therapy settings to
make sure they match the
prescription.
.
d. Press Start. The therapy begins.
196654__C_2019-Apr-29_Cleaned
To Next Page
Loading...
Need help?
General
