Hill-Rom Volara PVL1 User Manual

Volara™ System, Model PVL1 User Manual (196286 REV C) 49
Device Settings
SET THE PRESSURE CEILING LIMIT
The Pressure Management feature allows facility-authorized persons to
control the maximum pressure selection by setting a pressure ceiling
limit.The user is prevented from setting a therapy pressure that exceeds
the limit defined in the device settings.
WARNING:
Warning—To avoid patient injury, this setting should only be configured
by facility-authorized persons.
NOTE:
To prevent unauthorized persons from
adjusting the settings made, disable
Clinical Access after you have made the
settings.
1. Press Control, then slide Clinical
Access to OFF.
2. Press the Home menu control to
exit.
NOTE:
Available only if Clinical Access is enabled. See page 48.
1. Press Device, and press Controls.
The default pressure ceiling shows on-
screen.
196654__C_2019-Apr-29_Cleaned

Hill-Rom Volara PVL1 Specifications

General

Brand	Hill-Rom
Model	Volara PVL1
Category	Medical Equipment
Language	English