Volara™ System, Model PVL1 User Manual (196286 REV C) 59
Device Settings
Test the Connection to Electronic Medical Records (EMR)
If you have an EMR account assigned by the medical facility, you can
submit the therapy data from the system to update your EMR. Test the
connection and connect the system to the EMR portal before you start the
therapy.
1. After the Volara™ System is connected to
the WiFi network, press Settings.
2. Slide the server option to EMR.
3. Press on each of the empty field and use
the on-screen keypad to enter the
settings for:
• Server IP
• Port Number
• NTP IP
4. After all entries are made, press on the
last entered yellow highlighted field to
close the keypad.
5. To test the entries made, press Test
Connections.
6. If the test is complete, a confirmation
screen shows. Press Return to exit.
• If the test is unsuccessful, try again
later.
• If the test continues to fail, contact
Hill-Rom.
196654__C_2019-Apr-29_Cleaned
To Next Page
Loading...
Need help?
General
