●Communication Buffer 5-63
Comm. env. setup
2015.07.0712:45
Back
Com=0
[Stop
]
Buffer function
Buffer repeat count
Empty Buffer Fault
Timing of Fault
Data Number at Fault
Prev.Dsp.
NextDsp.
0
(0
〜
9)
(1
〜
9999)
M
Manual
Startup
HOME
Disable
Enable
０００１
Disable
Enable
Print Start
Print. Complete
5.9.2 Description of Functions
(1) Application procedure
● Prepare the following in advance:
Preliminary Preparation Items
No. Procedure
1 Specify "overwrite-enabled" for communication mode on the communication environment screen.
In addition, specify "t=fixed" for print message transfer ACK.
2 Set the buffer function on the second page of the communication environment setting screen to
"enable."
3 Confirm the setting values for "Buffer repeat count", "Empty Buffer Fault", "Timing of Fault" and
"Data number at Fault" on the second page of the communication environment setting screen.
Setting items of communication environment setting screen
Setting items Description Initial values
Buffer function Selects enable/disable for buffer function. Disable
Buffer repeat count
Sets how many times printing is to be executed before switching the
printing contents.
1
Empty Buffer Fault
Selects whether or not communication buffer errors are to be
generated. The conditions for occurrence are set by "Timing of
Fault" and "Data number at Fault".
Disable
Timing of Fault
Selects timing by which communication buffer errors are to be
generated.
Print Start
Data number at Fault
Sets the number of print data items by which a communication
buffer error is to be generated.
0
● The function (application) will be valid only when the printer is online and in the ready status.
Offline will set to standard-mode printing.
● The following shows the application procedure :
Application Procedure
No. Procedure
1 Switch to online.
2 Set to the ready status.
3
Transmit print contents accordingly so that print contents sent at least N times remain in the buffer.
(N: Data number at Fault)
4Print.
5 Subsequently repeat steps 3 and 4 above.
Procedure No.1 and 2 can be in random order
To Next Page
Loading...
Need help?
General
