● Using the AI code input support function (UX-D,E only) 4-92
4.15 Using the AI code input support function (UX-D,E only)
(1) Function
● "AI code" is the abbreviation for "Application Identifier".
AI code is an identification code that manages the data items attached to the head of a product code,
expiration date, quantity, lot No., and various other data, and is represented by a 2 to 4 digit number.
● AI code is used with barcode standards established by GS1.
"GS1" is the abbreviation for "Global Standard One". It is an international organization that designs and proposes
international standards.
● Items set by 4 kinds of barcodes (Code128, DM, QR or micro QR) can use the AI code input support function.
● The following AI codes can be input by AI code input support function.
AI code Data item Data length Character types that can be input
01 GTIN Fixed 14 Numeric
10 Batch or Lot Number Variable 20 Alphanumeric/ASCII symbols
11 Production Date Fixed 6 "YYMMDD" fixed or numeric
15 Best Before Date Fixed 6 "YYMMDD" fixed or numeric
17 Expiration Date Fixed 6 "YYMMDD" fixed or numeric
21 Serial Number Variable 20 Alphanumeric/ASCII symbols
30 Variable Count Variable 8 Numeric
91 Company Internal Information Variable 30 Alphanumeric/ASCII symbols
310* Net Weight - Kilograms - Trade Fixed 6 Numeric characters
320* Net Weight - Pounds - Trade Fixed 6 Numeric characters
No. Data length Condition
1
Fixed
Number of input characters does not match the data length.
2 A character other than an input able character was input.
3 Seven or more characters were set at the * part of AI code (310*) and (320*).
4
Var ia bl e
Number of input characters exceeds the data length.
5 A character other than an input able character was input
6 "FNC1" code was input at other than the beginning or end of an item.
*Indicates the number of digits after
the decimal point.
(0 to 6 can be input.)
Variable length is the maximum
number of characters.
● "FNC1" code must be added at the end of "Variable" data length items.
("FNC1" indicates the end of the variable length code.)
If "FNC1"is not input, the system will add it automatically
● If even one of the following conditions is satisfied, "Invalid Barcode" will be displayed.
*The AI code itself (2 to 4 digits) is not included in the input character count.
*The "FNC1" code at the end of a data length "Variable" item is not included in the input character count.
To Next Page
Loading...
Need help?
General
