Hitachi IJ UX User Manual

●On-screen message descriptions 9-12
No. Message Meaning of message Remedy
163 Ink Low Warning 2
The level sensor in the ink reservoir does
not work properly.
If IJ printer continues running as it is,
IJ printer will stop the ink jet within 60
minutes.
● Contact your nearest local
distributor.
164
Makeup Low
Warning 2
The level sensor in the makeup reservoir
does not work properly.
If IJ printer continues running as it is,
IJ printer will stop the ink jet within 60
minutes.
● Contact your nearest local
distributor.
165
Makeup Level
Sensor Broken 4
The level sensor in the makeup reservoir
does not work properly.
● Contact your nearest local
distributor.
9.2.3 Other messages
No. Message Meaning of message Remedy
187
Ink Temperature
Correction Notice
The selected setup does not allow ink
temperature corrections to be made.
( P1-4)
● Contact your nearest local
distributor.
200
No Ink
Concentration
Control
The current settings have made ink
concentration control unavailable.
( P1-5)
● Contact your nearest local
distributor.
201
Print Data/Settings
Notice
Recent changes to print data and printer
settings may have been lost. In the previous
session, power was cut OFF suddenly.
● Check print contents and each
setting value.
209
Print Start up
Failure
Printer startup failed.
● Turn the printer power OFF
and then back ON after 10
seconds.
● Contact your nearest local
distributor.
210
USB Memory
Error
USB memory is not inserted. Or an error
was generated when reading USB memory.
●Insert correctly.
●Replace with a new USB
memory.

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English