Hitachi IJ UX User Manual

●Start operation 3-10
Print Abort Confirmation No.184
CONFIRMATION
×
Printing will be aborted.
Solution Press <OK> to abort.
OK Cancel
Print description 2015.07.0712:45
SETTINGS LOGINEDITADJUSTSAVEOPENHOME
Operating Time Ink Presure
（Standard Value：
0.255 ）
1,234h ０．０００ＭＰａ
Print Count
０
Makeup Ink
TEST
START PRINTING SHUTDOWN
100%
＋−
OFFLINE
READY
ID:User2
ＳＡＭＰＬＥ １
3.1.3 Ready and Standby state switching operation
(1) “Ready” state → “Standby” state switching
● With the conveyor interlock being activated by “Ready” signal, should this “Ready” signal be
turned to “Standby”, the conveyor will stop.
Press READY on the upper of the screen, and the message "Print Abort
Confirmation" appears. Then press OK .
1
Press READY .
Press Standby .
Press OK .

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English