Hitachi IJ UX User Manual

●On-screen message descriptions 9-10
9.2.2 Warning messages
No. Message Meaning of message Remedy
65
Excitation V-ref.
Review
The excitation voltage reference needs to
be updated.
● Perform the Nozzle test and
update the Excitation V-ref.
setting.
( Technical manual 6.10)
66
Viscosity Reading
Instable
The viscometer output readings fluctuated.
Setting will be temporarily switched to no
use of viscometer.
● Contact your nearest local
distributor.
67
Viscosity
Readings Out of
Range
The viscometer is defective.
Setting will be temporarily switched to no
use of viscometer.
● Contact your nearest local
distributor.
68 Ink Viscosity High The ink viscosity is above the proper level.
● The ink concentration will be
adjusted to normal level.
If print quality is still poor,
then replace ink.
( Technical manual 6.3)
69 Ink Viscosity Low Ink viscosity is below the proper level.
● The ink concentration will be
adjusted to normal level.
If print quality is still poor,
then replace ink.
( Technical manual 6.3)
71 Battery Low M
The internal battery in engine section is
low.
The latest print data and operating
information may not be saved.
● Contact your nearest local
distributor.
● Replace the internal battery
in engine section and set the
data/time. ( 6.2).
72
Calendar Content
Inaccurate
Calendar content is inaccurate due to mal-
function of the clock.
● Contact your nearest local
distributor.
● Set the date/time. ( 6.2).
-
External
Communication
Error nnn
The serial communication port had a date
error.
● Note the error code and see
that no more errors occur.
( Technical manual 5.7)
80
Excitation V-ref.
Review 2
Up date the excitation voltage reference.
Print quality may become poor.
● Perform nozzle test and
update the excitation V-ref.
setting.
( Technical manual 6.10)
● Watch for the print results and
the Excitation V-ref.
Setting. for about 2 hours
after operation is started.
81 Ink Low Warning The ink level in the ink reservoir is low.
● Replace the Ink Cartridge
within 60 minutes
( 8.1).
82
Makeup Low
Warning
The makeup level in the makeup reservoir
is low
.
●Replace the Makeup Cartridge
within 60 minutes.
( 8.2).
83
Ink Shelf Life
Expired
Ink replacement time has come.
● Replace the ink
( Technical manual 6.3).
84
Ambient
Temperature Too
High
The ambient temperature is above the
proper level.
● Ensure that the ambient
temperature is within the
operating temperature limits.

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English