Hitachi IJ UX User Manual

5-5 ●Print without any sensor signal. (Test print, Start printing)
Test print 2015.07.0712:45
Back
Com=0
[Ready ]
Startprinting
Printing starts at the press of [Start printing].
5.3 Print without any sensor signal (Test print, Start printing)
(1) Functions
●This function prints by button operation without a print start signal being input.
●In Previous HMI screens, print can also be performed by pressing Start printing from the manual control
menu when in print ready status.
●In New HMI screens, print can also be performed by pressing START PRINTING in print description
screen (New HMI) when in print ready status.
(2) Operation
Verify that the printer is in “Standby” state.
Press Test print in the Maintenance menu.
1
Press Start printing .
Printing starts.
2
(Note) Prints repeatedly when the Repeat sensor mode of the User environment setup screen is
“OFF-ON transition” and repeat print is set.
To stop during repeat printing, press the Stop .
1
2
Start printing

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English