EasyManuals Logo

Honda BF8D User Manual

Honda BF8D
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
怈怉
U16FER9 (DENSO)
CR5EH-9 (NGK)
The spark plug becomes very
hot during operation and will
remain hot to awhile after
stopping the engine.
116
Spark Plug Service
Check-Adjust interval:
Replace interval:
Use only the recommended spark
plugs or equivalent. Spark plugs
which have an improper heat
range may cause engine damage.
Oil Change
MAINTENANCE
SPARK PLUG
WRENCH
SPARK PLUG CAP
Remove the engine cover.
Remove the spark plug caps.
Use the wrench and screwdriver
supplied in the tool kit to remove
the spark plugs.
To ensure proper engine operation,
the spark plug must be properly
gapped and free of deposits.
Every 100 operating hours or 6
months.
Recommended spark plug:
Replacement procedure is the same
as that of the refilling.
Remove the level screw and drain
screw to drain the oil. Inject oil
through the drain screw hole until it
starts flowing out through the level
screw hole. Reinstall and tighten the
level screw first and then the drain
screw securely.
Every 100 operating hours or 6
months.
1.
2.
3.
11/09/05 18:15:22 32ZY0620_116

Table of Contents

Other manuals for Honda BF8D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda BF8D and is the answer not in the manual?

Honda BF8D Specifications

General IconGeneral
HP Rating8 HP
Cooling SystemWater cooled
Fuel DeliveryCarburetor
Ignition SystemCDI
Starting SystemManual
Gear Ratio2.33:1
Fuel Tank Capacity12 L (external tank)
Engine Type4-stroke
Full Throttle RPM Range5, 000-6, 000 RPM
Shaft Length381 mm (Short Shaft)

Related product manuals