Honda BF8D User Manual

‘‘ ’’
‘‘ ’’
87
Tilting the Outboard Motor
To tilt up the outboard motor:
OPERATION (G type)
SHIFT LEVER
ENGINE STOP SWITCH
TILT LEVER
TTIILLTT
RRUUNN
((LLOOCCKK))
NN ((nneeuuttrraall))
ENGINE
COVER GRIP
STOP
········ NEUTRAL
Move the shift lever to the
N (neutral) position and stop the
engine.
Set the tilt lever in the TILT
position. Holding the engine
cover grip, raise the outboard
motor to the uppermost position.
Set the tilt lock lever in the
LOCK position (see page
).
Before tilting up, leave the outboard
motor in the running position for one
minute after stopping the engine to
drain the water from inside the
engine.
Stop the engine and disconnect the
fuel line from the outboard motor
before tilting the outboard motor.
1.
2.
3.
89
11/09/05 18:10:08 32ZY0620_087

Honda BF8D Specifications

General

HP Rating	8 HP
Cooling System	Water cooled
Fuel Delivery	Carburetor
Ignition System	CDI
Starting System	Manual
Gear Ratio	2.33:1
Fuel Tank Capacity	12 L (external tank)
Engine Type	4-stroke
Full Throttle RPM Range	5, 000-6, 000 RPM
Shaft Length	381 mm (Short Shaft)